is one of Australia’s finest modified cement based coatings which is been used widely in the domestic construction industry. It is one of Australia’s fastest growing trends allowing you to get the look and feel that you require for your new or used concrete.
Decorative styles and themes are endless with the use of patterns, textures and colours. Any designs are possible and can be coordinated with your ideas and surroundings which definitely compliments the appearance and adds value to your property. Overcrete is suitable for application on concrete driveways, pathways, patios, stairs and pool and barbeque surrounds. Our product has the capability to achieve different effects eg. Marble, stone, tiles, wood grain, sand stone, slate and polished concrete.
Overcrete is a cement based coating of a three part system designed to resurface new or old concrete or bitumen. The first part of our three part system is the cement based product, the second part is our Cement Activator which acts as a glue and gives the coating maximum strength and adhesion making this a long lasting and durable coating. Overcrete Powder Tints is the third part of our three part systems, made from 100% UV Stable oxides/pigments which means they will not fade from the sun.
WHERE CAN OVERCRETE BE USED OR COVER?
Concrete Driveways
Concrete Pathways
Concrete Patios
Stairs
Schools
Carparks
Factories
Pool Areas
BBQ Areas
Exposed Aggregate
Bitumen
Roads
SPRAY-ON TEXTURED FINISH
Overcrete Spray-On finishes is one of the most common finishes but with the wide range of design options it can become original master piece. When designing your concrete driveway or patio there are five main design principles that come into factor that you will need to let your contractor know:
- Base Colour
(grout line colour and width if applicable)
- Borders
(colour and pattern if applicable)
- Body
(main colour)
- Fleck Colour
(additional colours if applicable
- Center Pieces & Body Patterns
(eg. 400mm tile or blanket spray)
Useful Information
Please see our photo gallery for examples of recently completed jobs.
Please see our Overcrete Colour Chart for a range of colours, if you require a custom colour please contact us.
The sandstone spray-on is one of the newest finishes to the industry. It is a hand crafted finish where every tile has it's own unique look. There are two main colour ranges sandstone and greystone. Colours can be specified depending on applicator.
Please see our Colour Range, if you require a custom colour please contact us.
SLATESTONE TROWEL DOWN
The Slatestone Trowel Down is a unique handcrafted stained finish which can look like sandstone, slate or smooth stone. The patterns are hand scribed and range from square tile, roman tile or a crazy stone look.
ON-CRETE AUSTRALIA PTY LTD. has no control over the use or storage of this product and therefore does not accept any liability in this regard. Any verbal advice given should not be regarded as authoritative information. This is information is subject to change without notice, therefore all applicators should ensure they current information. This product is intended for use for only skilled tradesmen and where applicable statutory licensed tradesmen, experienced and trained in the use of this product. This product is warranted to be of uniform quality within the manufacture’s tolerance. The manufacture over the use or misuse of this product, therefore no warranty rests or implied, is or can be made either as to the effects of such use. The manufacturer’s obligations shall be limited to replacing product proving to be defective.
