SOLVENT BASED ACRYLICS SEALERS
|
SV21 Concrete Acrylic Primer has been formulated as a prime sealer where improved penetration and adhesion is required prior to applying SV24 Concrete Sealer High Gloss or SV26 Concrete Sealer High Build top coat concrete sealers. Areas of use: stamped concrete, stencil concrete, trowel or broom finished concrete. Also to be used on OverCrete or similar spay-on coatings were the temperature is 5 Degrees Celsius or lower in the winter months.
|
 |
|
SV24 Concrete Sealer High Gloss is a general purpose solvent base concrete sealer of medium viscosity and solids. It gives a clear film with a medium to high gloss and is most commonly used to seal spray on concrete coatings (Overcrete), Stencil Concrete & Stamped concrete.
|
 |
|
SV26 Concrete Sealer High Build has been formulated with a higher viscosity and higher solids for Overcrete or similar spray-on concrete coatings. Using SV26 Concrete Sealer gives your a thicker and more even seal with two coats. SV26 Concrete Sealer can also be used as a top coat concrete sealer for exposed aggregate. Concrete surfaces other than spray on coatings will most likely need to be primed with SV21 prior to coating with SV26 Concrete Sealer High Build.
|
 |
|
Concrete Sealer SV28 is an acrylic solution that produces a hard, yet flexible clear film and exhibiting excellent durability, clarity and colour retention and has excellent grease, water and alkali resistance. Contains a UV Absorber to improve protection from ultraviolet light. Concrete Sealer SV28 can be used fully tinted like paint or clear for reseal jobs over existing Stamp Concrete, Stencil Concrete or existing resurfacing jobs.
|
 |
|
SVMATT Concrete Sealer Matt has been formulated from the SV28 Concrete Sealer producing a hard, yet flexible clear film and exhibiting excellent durability, clarity and colour retention and has excellent grease, water and alkali resistance. Contains a UV Absorber to improve protection from ultraviolet light.
|
 |
|
SV13 is designed to enhance the colour of sandstone, granite, concrete pavers or slate. SVSS has excellent durability and helps protect against mould, water, dirt and oil. Contains a UV Absorber to improve protection from ultraviolet light durability.
For more information see - SV13 Sandstone Sealer Product Information |
 |
WATER BASED ACRYLIC SEALERS
|
Easy Seal is a water based sealer for concrete and cementitious coatings, with a blend of self cross linking polymers it is of high performance and low sheen. It is formulated to provide ease of application. Fast drying with excellent adhesion and general protection for concrete.
|
 |
WATER REPELLENTS
|
Water Repellent RP110 is a high quality general purpose water repellent for impregnating and priming mineral and highly alkaline substrates. Water Repellent RP110 is suitable for imparting water repellency to absorbent, porous, mineral construction materials.
|
 |
POLYURETHANES
SV23 TWO PACK POLYURETHANE
Is a two part polyurethane formulated to a medium solid for easy application, offering a beautiful and consistent finish. Dust and dirt washes off during rain and residual dirt can be easily removed by detergent and water. Therefore SV23 is generally the best option for long term protection on flat & low textured surfaces. Excellent finish coat over epoxy flooring with superior leveling.
Advantages include: High gloss finish; tough, and abrasion resistant. Excellent in areas of high wear. Excellent weather ability- resistant to high levels of UV and extremes of weather; chemical resistant.
For more information see - SV23 Two Pack Polyurethane Product Information |
 |
|
A non-yellowing two pack polyurethane, generally used where a tougher harder wearing gloss coating is required; for internal and external use. General uses are as a protective coating for Flake/Chip Flooring, Epoxy Flooring, OverCrete or similar cement spray on coatings. SV40 can also be tinted to a colour of choice and used as a coloured coating Areas of use; schools, shopping centres, driveways and public toilet blocks.
|
 |
|
Is the toughest wearing coating sold by On-Cretre. It is a single pack moisture curing polyurethane (non-yellowing). It can be used for both interior and exterior applications. When fully cured, SV45 has a very high abrasion resistance and a very high solvent resistance, ie; tire marking and chewing gum can generally be removed without damage to the coating. Areas of use are OverCrete, Epoxy Coatings, Flake/Chip Flooring, as a clear coating on ground polished concrete floors, timber flooring and also is used as an Anti Graffiti Coating on floors and walls.
|
 |
PRODUCT DISCLOSURE STATEMENT
ON-CRETE AUSTRALIA PTY LTD. has no control over the use or storage of this product and therefore does not accept any liability in this regard. Any verbal advice given should not be regarded as authoritative information. This is information is subject to change without notice, therefore all applicators should ensure they current information. This product is intended for use for only skilled tradesmen and where applicable statutory licensed tradesmen, experienced and trained in the use of this product. This product is warranted to be of uniform quality within the manufacture’s tolerance. The manufacture over the use or misuse of this product, therefore no warranty rests or implied, is or can be made either as to the effects of such use. The manufacturer’s obligations shall be limited to replacing product proving to be defective. |
